3D Printed Knobs

 I've been experimenting with some 3D printed knobs and switch caps for my "Moog" modules.

First, we have switch caps for the 1125 sample-hold module. These a mini version of the Moog slide switch caps on the original, printed in white ABS.

Then, a basic "chicken head" knob to match those on Behringer modules. They are designed to be a tight push fit onto a T18 shaft - the shaft will cut its own alignment grooves into the knob when the knob is first installed. These are plain black ABS so you will need to paint your own white line and any infill. 

The switch caps are currently free with a purchase of the 1125 panel, the knobs are GBP 1.00 each.

1630d Frequency Shifter

 My latest module, the 1630d Frequency Shifter.

This could be considered a "cheat", as the module is a digital interpretation of the Moog/Bode 1630 Frequency Shifter module. For ease of construction and programming I have based this on a standard Teensy 4.0 processor module together with the Teensy Audio Board. A custom front panel PCB hosts these together with the controls and interface circuitry.

The original Moog module requires many careful adjustments, or close tolerance component selection, in order to operate successfully. I therefore thought that the digital approach was justifiable in this case.

Note that this is a "Frequency Shifter", not a "Pitch Shifter". 

There are some differences between the 1630d and the original Moog 1630:

• The 1630d includes two audio inputs; the 1630 has only has one.
• There is no dedicated “mix” output on the 1630d – the MIX output can be assigned to “OUT A” or “OUT B” (or neither)  using the “MIXTURE” control and associated push button.
• The 1630d includes a “MIX CV” input that can control the content of the MIX output.
• There is no “ZERO” position on the SCALE switch, as this is not required for the digital version. The switch position has been re-used to provide a 1V/octave calibration function (CAL) for the CV inputs.
• The 1630d uses digital FIR Hilbert filters instead of the (analogue) "dome" filters used in the original. At low frequencies the digital filters are not as flat in their phase and frequency responses as the original analogue ones.
• The software contains several user configurable options to tailor the module to individual taste.
  

The module can be build using only though-hole components. Some of the ICs have surface mount options instead of through-hole to ease component sourcing. You will need to be able program the Teensy module using the open source software.

PCBs are in stock, panels will be in stock soon.

Video:

International Shipping resumed!

 We have now resumed international shipping. Thanks you for your patience.

International Shipping

 UK Royal Mail is suffering the effects of a "cyber incident" that has affected all international shipping.

 I won't be able to ship any international orders until this is resolved.

New "Moog" modules for 2023

Three new modules for 2023, see the "Moog eurorack modules" page for more details:

951 and 952 Keyboard Inferface modules.

These modules provide functionality that is present in Moog modular keyboards, and are primarily intended to provide easy performance adjustment of 901A/B oscillators. They can also be used with standard Behringer System 55 VCO modules.

Each module features:
-  “Scale” control: CV multiplier, from 0.94 to 1.06
-  “Range” control: adds or subtracts an offset to the CV ±150mV (approx 2 semitones)
-  Switchable exponential or LCR (“linear constant rate”) glide.

The 951 is an 8HP single channel module. The 952 is dual channel module, also in 8HP.

 

 

 

1125 Sample-Hold Controller

The Fitzgreyve 1125 is a 16HP Eurorack implementation of the Moog 1125 “Sample-Hold Controller “ accessory.

The original Moog design has been used, but with the following additions:

-          START and STOP input jacks, voltage triggered (V-TRIG).

-          External Sample-Hold input jack, bypassing internal voltage sources.

The panel layout is intended to capture some of the “look and feel” of the original, in a Eurorack format.

 1125 Video:

 

Not "Black Friday" Sale

 The "not black Friday" Sale.

I'm clearing out some of my older projects, so it's "buy the panel, get the PCB for FREE":

Until further notice, all of the panels below now come with a matching FREE PCB:

 

100m-ish Modules:

• 100m-ish VCO Driver  GBP 14.00 (3 in stock)
• 100m-ish Audio Delay GBP 15.00 (9 in stock)
• 100m-ish Ring Mod GBP 12.00 (1 in stock)
• 100m-ish Signal switch Aluminium panel GBP 16.00 (7 in stock)
• 100m-ish fixed HPF Aluminium panel GBP 12.00 (7 in stock) slide switches included
• 100m-ish fixed HPF Black FR4 panel GBP 6.00 (8 in stock)  slide switches NOT included (see below)
  

 

Other Modules:

• dAhDShR enhanced ADSR GBP 16.00 (7 in stock)
• Transient/ dAhDShR Expander Black Aluminium Panel GBP 10.00 (8 in stock)
  

 

Useful accessories:

• Slide switches for 100m-ish HPF GBP 2.00 for 2
• Programmed PIC chip for dAhDShR GBP 6.00

 

995A Reversible Attenuators

 

My latest module is a Eurorack implementation of the rare Moog 995A reversible attenuators, or “attenuverters” in modern terminology. This was suggested by a customer.

As far as I am aware, this was produced as a “special” for the Keith Emerson Moog Modular, and therefore only included in the recent "Emerson" reproductions.

The module uses my interpretation of the Moog op-amp based attenuverter circuit based on the  CP3A PCB.